Mounting Dream Tilt Tv Wall Mount Bracket For 42-84 Inch Led

I have never installed a tv on a wall before & i was flying solo on this project so i could surprise my husband. The bracket was perfect for my needs. Simple design with multiple mounting holes, allowing me versatility in how i secured it. – tv size is 65′- weight 64 pounds (i weighed it)- installed & hung 100% by myself- used included bubble level, it worked well enough for me- feels secure & stablein my pictures you will see the large tv i hung on the floor with the 32′ sitting on the desk above it for scale. Behind the tv is a 36′ wide window, which is the exact spot i needed the 65′ tv to hang. I didn’t want to drill holes in my lath & plaster walls. I also didn’t want to drill large holes in my moldings. I decided to make supports out of structural aluminum, mount those into the framing of my window opening. With my aluminum bracing and the tv bracket attached to it, i tested it by hanging from the thing like it was monkey bars. I’m 135 pounds and it felt firm.

Ordered two of these to mount a couple of older flat screens (42 inch lg and a 42 inch panasonic). Both of them seemed very consistently machined, but there is enough play in the slots to adjust a little bit to make up for any small differences. Once the plate was bolted to the wall the rest snapped together very easily. My only gripes about it are the adjustment for the tilt on the mount. This needs to be done without the tv being on the wall (which means if you dont like the angle you need to take the tv back off of the plate on the wall). The other issue it that there aren’t any marks on the adjustment slot so it can be tricky to get both sides the same since there are two adjustments that are independent of each other. These are minor issues especially considering the price. The mount also comes with an hdmi cable and a small level. Some people that reviewed said that they wouldn’t trust them. I compared the included level with my normal one and it’s definitely a cheap level but did its job well enough, i used it while mounting mine up just to see and got a good result.

Very happy with the quality and build of this unit. Used it to mount my 65 inch tv. Feels secure and the straps aren’t visible with such a large tv. I would not recommend relying on the level included with the kit. Mine read off and i had to re-drill and adjust using my quality level. But once up, its up and it ain’t coming down. Funny that brick and mortar stores charge 2 to 3 times the price for a unit like this. Thank you mounting dream, and thank you amazon. Hey, remember when you just basically sold books. I do; oh how far we’ve come.

This is the second mounting dream wall mount i have purchased, with this being a larger one as i had a 55” tv for a different room and bought this for a new 65”. The instructions are easy, mounting is easy and in comes with so many different options to ensure it will work on basically any tv. The tcl i purchased has a weird bulge that made fitting this a bit awkward compared to my other tv, but the spacers made them a non issue. I highly recommend using carpenters tape (the blue tape) to outline where you want your tv, soundbar, etc. Before you make holes on your walls as once you do that you will most likely adjust it after visually seeing the outline. While this has nothing to do with the product, it will make your mounting life so much easier. I know as we did not do that for the first/previous one we did.

Good straightforward mount that works as you would expect. The wall plate comes in two pieces and you screw the right side rails to the center bracket. This could be a problem for some. The release pulls are adjustable in length to help hide them behind smaller tv’s. I am using this in a rental unit and found it to be quality substantial enough for light commercial action. Works great for a flush mount on a very thin led backlit 55” tv. Instructions make it clear that you should not mount the tv at the furthest couple inches of the wall mount. I thought that it was odd the rail extends all the way to the end and would have engineered it to end a couple inches before the last mount. In reality, it should not matter as someone with 16” studs and a tv that is 400mm vesa will still have substantial weight on the other screws. What may be more concerning is a heavy 100mm wide vesa on the far end over one pair of screw holes and levering the other screw holes.

Size:TV Mount for 42″-84″ TV Designed for 42-84″ TVs This TV mount fits most 42-70″ LCD/LED/Plasma TVs sold today such as those from TCL, Samsung, Sony, Panasonic, Toshiba, Vizio, Sharp, LG, Philips etc. Suitable for TVs with mounting holes as close as 8″X4″ or as wide as 24″x16″ (VESA 200X100mm to 800X400mm). Specifically, it fits VESA 200X100, 200X200, 300X200, 300X300, 400X200, 400X300, 400X400, 500X300, 600X200, 600X400mm, 800X400 One-piece wall plate design with wood stud spacing of 16”, 18”, 24” and 32” TV mounts with clever one-piece wall plate design requires no assembly, thus saving you time and easy for TV centering. The additional length also provides centering flexibility for wood stud installation without the need of extra extension brackets. Low 1. 5″ profile Flush-Tilt design is only 1. 5″ from wall yet still tilts to improve viewing and reduce glare. Release and Lock 0 degree to hang or take off TV, 100% high carbon steel secure. Accessories in Package 6″ 3-axis Magnetic Bubble Level, 2 cable ties offer cable management for a neat and tidy look. Designed for 42-84″ TVs This TV mount fits most 42-70″ LCD/LED/Plasma TVs sold today such as those from TCL, Samsung, Sony, Panasonic, Toshiba, Vizio, Sharp, LG, Philips etc. Suitable for TVs with mounting holes as close as 8″X4″ or as wide as 24″x16″ (VESA 200X100mm to 800X400mm). Specifically, it fits VESA 200X100, 200X200, 300X200, 300X300, 400X200, 400X300, 400X400, 500X300, 600X200, 600X400mm, 800X400 One-piece wall plate design with wood stud spacing of 16”, 18”, 24” and 32” TV mounts with clever one-piece wall plate design requires no assembly, thus saving you time and easy for TV centering. The additional length also provides centering flexibility for wood stud installation without the need of extra extension brackets. Low 1. 5″ profile Flush-Tilt design is only 1. 5″ from wall yet still tilts to improve viewing and reduce glare. Release and Lock 0 degree to hang or take off TV, 100% high carbon steel secure. Accessories in Package 6″ 3-axis Magnetic Bubble Level, 2 cable ties offer cable management for a neat and tidy look.

Features and Spesification

• Make sure this fits
  by entering your model number.
• UNIVERSAL DESIGN: Tilt TV wall mount for 42-84 inch TVs weighing up to 132 lbs. Compatible VESA(mounting holes spacing) range from 200X100mm to 800x400mm. Check images on left side for more compatibility information
• SPACE SAVER: Low profile design ensures this TV mount an incredibly thin side profile of just 1. 5″ from the wall, allowing you to mount your TV almost flush with the wall to save space
• REDUCE GLARE: Tired of TV wall mounts without much flexibility for tilting adjustment or reducing glare? Our TV mount allows a forward tilt of up to 8 degrees for an optimal viewing experience
• EFFORTLESS INSTALLATION: One-piece wall plate, decent instruction, and all necessary hardware in pre-labeled bags make installation as easy and convenient as possible. Comes with bubble level and cable ties for cable management. Concrete wall anchors will be sent per request
• WORLD-CLASS CUSTOMER SERVICE: Our US based customer service experts are always available to help. Backed up by our leading 10-year and service!

Available on Amazon