FORGING MOUNT Forging Mount Long Extension Tv Mount Corner Wall Mount Tv Bracket Full Motion

I wanted it to wrap around a corner, so it could be viewed from multiple parts of the room, and it worked for me. Took a bit of tinkering with the bolts to get the smoothness just right, but very happy with it in the end. And i like that most of it came pre-assembled, i’ve set up tv wall mounts in the past that arrive from amazon like a jigsaw puzzle and you have to put every single piece together, but i like that this wasn’t like that, made the installation much quicker. This will be a great addition for entertaining guests, and movie nights, but can be tucked away next to the wall when not in use.

I wanted a long-extension bracket to replace the oem stand our tv has been on, so that it could be more easily pointed towards an elliptical trainer or towards seating. Although the included 15mm m8 bolts were too short and the 30mm m8 bolts would have required the use of 3 spacers to work so i replaced them, i am very happy with the quality of this bracket, and since it was a different utilization than i had seen in other reviews, i included photos. I used a length of finished 1×12 to attach the bracket to the cabinet. Slightly loosening the bolts at the hinge points allows for easy maneuvering. I would definitely buy this again for another application.

The wall mount gets the tv out of her way and she can use the space on top of the file cabinet. She likes the tilt, rotation and pull it away from the wall and angle the tv horizontally. We were also limited by the limited space between the wall and the window to the right, preventing the use of other wall mounts. Installation was relativity easily. Found the vertical framing installed the mount, then mounted the tv to the mount, ran the cables. Installation took 30-45 minutes. All required hardware was included.

I purchased one of the other popular mounts on here that only extended 14′ from the wall. I wasn’t able to angle my 65′ tv quite right. I decided to order this one and it works perfectly i can get the tv angled just right and can swing it back and forth for living room or kitchen/dining room viewing.

This looks bulky as heck but wow i don’t worry about my 75” tv at all. I had it mounted in a way on the wall that i can pull it out and make it a corner tv so everyone can see it in the room.

30 inchs long extension TV mount

Product features

30 inch Extends This long arm TV wall mount has a long mounting arm for maximum reach with bigger heavier TVs and screens with bigger diagonals. When you fully extend TV wall mount you can easily swivel your big screen TV up to 180 degrees.	Fully motion Adjustable Tilt up 5 degrees and tilt down 15 degrees. Swivel left and right on 3 pivot joints (180 degree base swivel and 360 degree arm joints swivel). +/-5 degrees of screen level adjust for maximum viewing flexibility. Provides smooth adjustment for all directions so gives you plentiful opportunities to find the best viewing angle from anywhere in the room.	Corner Installation Designed with offset wallplate and long arm to allow installation to a corner. Utilize the dead corner space by installing your flat/curve television on the wall.Even 70 inch TVs can be installed at a corner with room to adjust angles.

Features and Spesification

• 30 INCHS LONG ARM TV Mount: Fits most 32″-70″ flat/curve TVs like Samsung, Sony, Panasonic, Thomson, TCL, Hisense, Toshiba, Sharp, LG, Philips, JVC etc VESA patterns from 200×100 up to 600x400mm, weighing up to 99lbs
• CORNER TV WALL MOUNT FULL MOTION: Designed with offset wallplate and long arm to allow installation to a corner. Utilize the dead corner space by installing your flat/curve television on the wall.Even 70 inch TVs can be installed at a corner with room to adjust angles.
• Complete Range of Adjustment: Extends, articulates, tilts, swivels, levels and collapses on this long arm full motion TV bracket.it can be adjusted to fit your any rooms and ensure the best viewing angle, cable management is included.
• Durable and Reliable: This long arm TV mount is build with heavy duty carbon steel construction, unsplit wallplate and arm design to support TVs up to 99 lbs, and it is passed 310Lbs loading test.it has wide appaction: home,office,hospital,school，shopping mall,restaurant..
• Easy Fast Installation: This TV bracket comes with pre-set drill hole template and variety of screws and easy to follow instruction manual to accommodate any brand of Television. This TV wall mount can be used in 16″ wood stud wall and solid concrete wall.

Available on Amazon